100 Watt PA System

Instructions & Guidelines For Use

1.     Included in this rental is (1) Amplifier, (2) Microphones with cords,  (2) Speaker wire spools, (2) Speakers and a storage container.

2.     Take the (2) spools of wire. The wires have been stripped at both ends of the spool. At each end, a white spot has been painted onto one of the split wires. You will need this designation when hooking up the speakers

3.     On the back of the amplifier, you will see an area labeled “speakers”. You will notice a black button and a red button. Take a wire from each spool, push the black button (this opens the hole to insert the wire) and insert both into the hole (please note: if inserting the white marked wire from one spool, insert the white marked wire from the other spool).

4.     On the back of the speakers, you will see an area with a black button and a red button. Follow the same instructions as in #3 above. If you inserted the painted wires into the black slot on the amp, insert the painted wires into the black slot on the speaker.

5.     Plug the microphone into the designated area on the back of the amp. See designations “MIC-1; MIC-2”, etc. The rental includes (2) microphones. It can accommodate up to (4) microphones.

6.     You can hook up your CD player, stereo, IPod, etc. to the amp in the coax marked “In” and “Out” on the back of the amp. You must provide any wiring needed to do this.

7.     All controls for sound adjustments are on the front of the amp.

8.     When finished using the unit, please return the microphones and wire spools to the Ziploc bags provided.

9.     If you have any questions, please call 610-268-2825.